rolling friction

英 [ˈrəʊlɪŋ ˈfrɪkʃn] 美 [ˈroʊlɪŋ ˈfrɪkʃn]

网络  滚动摩擦; 滾動摩擦

化学



双语例句

  1. In the case of roller bearings, the rolling friction is substituted for sliding friction.
    就滚柱轴承而论,滚动摩擦代替了滑动摩擦。
  2. It provides the testing program of planar bearing rolling friction.
    给出了平面轴承滚动摩擦试验方案。
  3. Research about Rolling Friction Pendulum Seismic Isolation System on Ellipse Curve Slide
    椭圆曲线滑道辊轴摩擦摆隔震系统性能的分析计算
  4. In fact, M0 accounts for the additional external sources of friction, together with the "hydrodynamic" component of rolling friction, which also has a load dependent part.
    实际上,m0代表额外的外部摩擦来源,再加上滚动摩擦中的“流体动力”成份,而这一成份中也有一部分与负荷相关。
  5. Up and down roller rolling friction installations will help reduce resistance and lower power consumption.
    上下压轮装置采用滚动摩擦,有利于减少工作阻力,降低功率消耗。
  6. Research about rolling friction pendulum earthquake isolating system on circular slide
    圆弧滑道双辊轴摩擦摆隔震系统的研究
  7. Analysis of Rolling Friction Power Loss of Roller Bearing Clutch
    滚柱轴承离合器滚动摩擦功耗分析
  8. Through a series of friction test with metals and nonmetals, the values of coefficient of rolling friction and the rules of its variation have been obtained, from that, its main influential factor is examined.
    通过一系列金属和非金属材料的摩擦试验,测得滚动摩擦系数值及其变化规律,从而指出了影响滚动摩擦系数的主要因素。
  9. Study on Complex Damage of Mechanical Fatigue Together with Rolling Friction and with Sliding Friction in Metallic Rubbing Pairs
    金属摩擦副的机械疲劳与滚动摩擦和滑动摩擦复合损伤的初步研究
  10. Introducing the generalized Maxwell model and corresponding the relax time spectrum lead to the calculating relation of the tire rolling coefficient and relax time spectrum, and the influence of velocity on coefficient of rolling friction is discussed.
    通过广义的Maxwell模型,研究其松弛时间谱与滚动摩阻的关系,得出了轮胎滚阻系数与松弛时间谱的计算关系并讨论了滚轮前进速度对滚动摩阻系数的影响。
  11. A study on the rolling friction coefficient and the horizontal driving-force calculation in building monolithic moving engineering
    滚轴滚动摩擦系数研究与建筑物迁移工程水平动力计算
  12. Study on engagement properties of the rolling friction cycloid drives planet
    滚动摩擦摆线行星传动啮合特性研究
  13. Study on Cold Rolling Friction Factor Model of Narrow Strip Steel
    窄带钢冷轧摩擦系数与模型试验研究
  14. The Mechanism of Producing Rolling Friction Force and Its Calculation
    滚动摩擦力的产生机理及其计算
  15. A mechanism of rolling friction and the coefficient of rolling friction
    滚动摩擦机理和滚动摩擦系数
  16. A new type of cylindrical surface envelope globoidal worm gearing with rolling friction and point engagement, is presented. The mathematic model of high-pair mechanism about its location error and variation relationship is also given.
    提出了新型滚动式圆柱面包络点啮合环面蜗杆副的高副机构传动原理,建立了此类机构误差与变异关系的数学模型,据此分析了机构对各类误差的敏度及其适应性问题;
  17. The rolling friction of overrunning clutch for pulse-continuously variable speed transmission ( Pulse-CVT) is discussed.
    研究了脉动无级变速器用超越高合器的滚动摩擦。
  18. Its crucial idea is to use the rolling friction to replace the sliding friction.
    它的中心思想是:滚动磨擦代替了滑动磨擦。
  19. Based on the influence of the solid shrinkage of weld seam on welding residual stress, value of welding residual stress is decreased through reducing the friction resistance, so the further studies on the measure through changing sliding friction into rolling friction were taken.
    根据焊缝固态收缩对焊接残余应力形成的作用,课题组进一步研究了将滑动摩擦变滚动摩擦的方法来减轻焊件自重拘束以达到调控焊接残余应力的目的。
  20. Upon the theory of hot elastohydrodynamics about part film load bearing, the sliding and rolling friction forces in gear transmission device can be calculated.
    运用部分膜承载热弹流理论计算齿轮传动中的滑动摩擦力和滚动摩擦力。
  21. On the other hand, the dynamic model of wedge process was constructed for the roller clutch involving the elastic contact and the rolling friction.
    考虑超越离合器的弹性接触和滚动摩擦,建立了超越离合器楔紧过程的动力学模型。
  22. Based on the theory of the rolling friction transmission, the principle and techniques of obtaining an accurate angle between friction discs in on-machine measuring large gears are studied.
    基于滚动摩擦传动机理,研究了大型齿轮在机测量中的摩擦盘精密测角原理与技术;
  23. In the end, the feasibility of the spherical enveloping worm gearing with rolling friction and point meshing and the factors affecting meshing efficiency are discussed.
    推导了啮合效率的计算公式,证明了这种滚动式球面包络点啮合环面蜗杆传动的可实现性。
  24. Experimental Study of Planar Bearing Rolling Friction
    平面轴承滚动摩擦试验研究
  25. Monitoring Test of the Wear Conditions of Ball Bearing Rolling Friction Pairs
    球轴承滚动摩擦副磨损状态的监测试验研究
  26. Based on the point meshing theory of medium conjugation, we have derived the fundamental equations of synchronous medium point meshing for a new type of revolving surface enveloping globoidal worm gearing with point meshing and rolling friction.
    应用媒介共轭曲面的点啮合理论提出了滚动式回转面包络点啮合环面蜗杆副的廓面构形和点啮合原理;建立了滚动式回转面包络点啮合环面蜗杆传动媒介共轭点啮合的基本方程;
  27. Adhesion problem of contact wheel and rail is essentially rolling friction problem, the max longitudinal friction by influence of many cases.
    轮轨粘着问题实质上是滚动摩擦问题,机车车轮在钢轨上滚动其最大的纵向摩擦力受很多工况的影响。
  28. The study of rockfall motion characteristics focus on determining the key parameters, namely restitution coefficient and rolling friction coefficient.
    落石运动特性的研究主要在于确定其关键参数,即落石的碰撞恢复系数和滚动摩擦系数。
  29. The relationship between the parameters ( speed, the pendulum number, length, quality and installation location, the rolling friction coefficient and viscous damping coefficient) and the dynamic characteristics of pendulum-type automatic balance device was analyzed through simulation. 3.
    通过参数化的仿真方法分析了各种参数(转速,摆锤个数、长度、质量及安装位置、滚动摩擦系数和粘性阻尼系数)和摆锤式自动平衡装置动态特性之间的关系。